|
Home: Thermal
Management : Cool Shield
|
Aisle Partition System for Superior Cooling Efficiency |
|
|
5 Green Solutions with High ROI |
|
Product PDF |
|
Request More Information |
- Hot or Cold Aisle Containment System for Significant Cooling Efficiency Gains
- Cost Effective Solution Easily Installs to Drop Ceiling,
Floor or Cabinet Tops
- Strips Cut to Size for Your Specific Application
- Eliminate Hot Spots and/or Increase Cooling Capacity
|
Cool Shield is a cost effective partition system to contain the air in cold aisles and/or hot aisles of a data center. The system can include 12” wide anti-static, fire-resistant strips and/or panels for the aisle door and ceiling. All components are pre-cut to size for ease of installation. For cold aisle containment, Cool Shield will keep the cool air from your perforated tiles at the front of the cabinets where it is needed. This can eliminate hot spots and provide higher cooling for dense server installations. For hot-aisle containment, Cool Shield serves to prevent recirculation of hot air to the server intake at front of cabinets. Even if you don’t have hot spots, Cool Shield can be used to dramatically improve efficiency and reduce cooling costs by concentrating cooling where it is needed most.
Fusible links are included in the mounting kit to comply with any local fire regulations. In the event of a fire, the strips or panels would drop to the floor before sprinklers discharge.
|
 |
| Cool Shield
Strips are used above the racks and in aisle entry to provide total cold aisle
containment |
 |
 |
| Cool Shield
Panels can be used as a ceiling for the aisle and double doors can be used for aisle entry.
Light weight, clear panels easily lift off to allow access to
top of cabinets |
A combination of panels, strips and doors can be used to best suit your application |
| Fusible Links Allow Strips
or Panels to Fall Before Fire Suppression Discharges |
 |
Two-piece links will separate at 155 degrees |
| Most fire suppression systems discharge above 165
degrees |
| Easy to Install |
|
Mount does not fall, only strips or ceiling panel |
| Drop Ceiling Mounting Kit Designed for Easy Installation |
 |
Twist-Clip with Stud Locks to Ceiling Grid |
| Attach Channel Guide |
| Slide Mounting Channel onto Guides |
|
Attach Fusible Link and Strips to Mounting Channel |
|
Channel Bar Configurations
for Mounting Options without Drop Ceiling |
 |
Can be Secured to the Top of Server Cabinets with or without Screws |
| Create a Fully Self-Supporting Frame which Secures to
the Floor |
| Erector Set Style Design Offers Easily Numerous Customizable
Solutions |
| Before Cool Shield The rows of cabinets on the far right have extreme temperature issues
|
After Cool Shield Cold aisle containment solved the problem with no effect on the rest of the data center |
 |
 |
* - Savings calculations based on conservative estimates of efficiency gains and estimated energy cost of .12 per kW hour. Efficiency numbers based on aisle containment studies completed by Data Center Resources, Liebert, Rittal, APC and Gartner Group. Please request any of these studies by contacting us at
info@datacenterresources.com |
|
|
Cool Shield Proposal
Request
|
|
|
|
Trade
Memberships |
|
|
